Written by Dr. David Wheeler

M-Water^® products (inclusive of a complete range of different water products and also referred to as M-Power products) are produced with a technology that involves imprinting water with a proprietary process of motion, which begins at a primary level and then becomes translated into secondary levels of creating specific effects in water This technology is referred to as the M-Power Aqua Technology.

This more detailed presentation on the M-Power™ Aqua Technology is meant to more clearly define the two basic components of motion and electromagnetic input. The reason for doing so is make sure that the uniqueness of the M-Power Aqua Technology is explained thoroughly, which is tied directly to the uniqueness of in vitro testing and independent clinical studies. When reading information about the M-Power Aqua Technology that summarizes the two basic components of motion and electromagnetic input, this technology section should be referred to in order to clarify the technology uniqueness in regards to the type of motion used and the fact that there is no increase in magnetic strength used (stays within the .50 gauss range emitted by the earth). Also, there is no direct attempt to focus a narrow range of magnetic effect on water with this technology through the placement of manmade magnets or natural magnetic material from the earth near water during the technology process.

The secondary levels of the M-Power Aqua Technology do not involve the imprinting process of motion, but involves additional proprietary mechanical components that allow for the indirect transfer of basic effects from the primary technological level of application. With the secondary levels of the M-Power Aqua Technology an unlimited volume of water can be transformed into M-Water products, which is based on direct applications of technologies to water bottling facilities and municipal water supplies and other water sources used for a variety of applications (not only including bottled water and healthcare but for other beverages and solutions containing water, animals and agriculture). This application of secondary technology is fundamentally very simple to apply and could be implemented worldwide very easily to all water used for municipal supplies, bottled water, beverages of all kinds, the food industry, healthcare for both humans and animals, topical cosmetics, pharmaceuticals and agriculture.

The M-Power Aqua Technology is in no way similar to any other functional water technology, which is also true in terms of comparing this technology to other technologies that are currently patented or presented in the US patent website as patent pending. The totally unique M-Power Aqua Technology is now patent pending.

Not only is the M-Power Aqua Technology unique, but the products it produces are unique (often referred to as M-Power products). The uniqueness of these products is based on in vitro testing and clinical studies. A range of water properties has been established that indicates hydration capacity, which is called Optimum Hydration Profile (O.H.P.). Only M-Power products have O.H.P. Clinical studies point out that M-Water products, and particularly so when it comes to low dissolved solid water with no substance added to elicit an effect, are unique in terms of clinical outcome. M-Power products are the only ones in the world currently proven to dramatically increase cellular hydration based on independent clinical studies.

The uniqueness of the M-Power Aqua Technology and the product it produces is necessary to successfully receive a patent. Therefore, the end result of applying for a US patent on the M-Power Aqua Technology should be successful. The difference in M-Power products is defined by the singular, theoretical component of “vibrational potency” (more thoroughly explained in a separate section in this book that compares M-Water and Core Water). Although the clinical studies point out a difference in effect based on using the different M-Power products, on the micro level of H20 in low dissolved solid water the exact mechanism is not precisely known but is still theoretical (just as the water molecule itself is theoretical and has never been seen). When I use the term theory, I do so in the mainstream vein. All theories that explain the inner molecular dynamics and structure of M-Power products are based on mainstream chemistry and physics.

In the 150 day clinical study a combination of M-Water and Core Water were used over a 150 day period, with the psychological effects, increased cellular hydration, decrease in stored toxins and pH balancing demonstrating an amplified health effect. With the primary and secondary components of the M-Power Aqua Technology it is possible to produce functional water, with low dissolved solids and no substance added as a component of the technology.

The Technology Components
Clarifying Previous Information

The information presented in this section is meant to supersede all previous descriptions that people have received or presented about my discovery of the M-Power Aqua Technology, which better explains how it works in the area of magnetic and vibrational influence. It isn’t that previous information was inaccurate, but instead I did not go into great detail about magnetic influence as it pertains to the M-Power Aqua Technology. Without going into greater detail, people may not be clear about the differences between the M-Power Aqua Technology and other technologies that produce functional health water products.

In some of my writings over the years about the M-Power Aqua Technology I have indicated that electromagnetic input is used simultaneously along with the imprinting process of motion to transform water into a high energy state, along with other fundamental changes in properties. It is this electromagnetic influence, in my opinion that contributes greatly to stabilizing the dynamic and structural changes that define the uniqueness of M-Power products and their superior hydrating effects.

However, the reader of this information may get the wrong impression about what I mean by electromagnetic input. Many people, and particularly scientists, may think in terms of higher magnetic strengths in relationship to my description of electromagnetic input. However, the M-Power Aqua Technology does not include magnetic material, man made magnets or natural such as magnetite, that increases “gauss” strength more than what the earth produces on average under all circumstances every where. Gauss is defined as the centimeter-gram-second unit of magnetic flux density, equal to one maxwell per square centimeter (according to the Answers.com online dictionary).

The average gauss strength of the earth is .50. A very low powered magnet is 400 gauss and a high powered magnet available easily to the public is often well above 10,000 gauss. Natural materials can sometimes have a stronger gauss strength than weak man made magnets, such as the mineral magnetite (up to 900 gauss).

The gauss strength of the earth people walk on at half a gauss does not create the more obvious changes that can be observed between higher strength magnets, but will cause the needle of a compass to align with the North/South magnetic field of the earth.

A better description of the electromagnetic input component via the M-Power Aqua Technology is to frame it as special environment, rather than as a gauss strength difference supplied by some magnetizing source. The gauss strength of the electromagnetic component in the M-Power Aqua Technology remains at .50 gauss. Water does not pass through any sort of strengthened magnetic field as an independent component in the M-Power Aqua Technology. It is my theory that gauss strength beyond the normal .50 level emitted by the earth will distort the structure and frequency of water molecules. It is clear from physics and chemistry that magnetic fields have their own specific vibrational expression and will alter the vibrational expression of other physical material.  In the case of the M-Power Aqua Technology there is a refinement but not a gross altering of the vibrational expression of water based on magnetic influence. It is my theoretical position that this refinement by vibrational expression used in the M-Power Aqua Technology further adds to the stabilization of the molecular dynamics and structure of M-Power products.

With the M-Power Aqua Technology, the difference in electromagnetic input involves subtle nuances in how the magnetic field is involved in the immediate region of the technological application. A change in the environment where the technology is applied involves specific physical structures that become associated directly and indirectly with an induction of a very specific proprietary imprinting motion. The motion and organizing the electromagnetic field at a level that doesn’t exceed the natural surroundings is a simultaneous event. The subtle vibrational nuances associated with this magnetic field environment adds to the transformation of water in order to produce healthy outcomes for a living multi cell organism (proven to do so with clinical studies and in vitro analysis).

The way in which the vibrational nuances change with the application of the M-Power Aqua Technology can be somewhat understood by reading about the difference between M-Water products and other types of water. It is not enough to present the vibrational “music” of water based on the just the gross frequency states involved, but instead to transform the vibrational “music” of water into a beautiful symphony that are life supporting to the cells of the body. The M-Power Aqua Technology, through a special integration of its local environment, will instill the subtle nuances of vibration into water as a part of the transformational process to produce what I like to refer to as “Perfect Living Water.”

The Specifics of Motion
& the ever changing nature of water

As I have already pointed out, using water motion is one of the two components utilized at the primary level of the M-Power Aqua Technology. The primary level is then applied to make secondary levels of the technology for high volume production of water products produced with this technology.

Clarification has already been provided in order to make sure that the electromagnetic component of the M-power Aqua Technology is understood in terms of magnetic strength remaining in the normal range emitted by earth (.50 gauss). Further clarification on the motion of water is also necessary to further establish the uniqueness of t he M-Power Aqua Technology.

There is more than one purpose for using a specific process of motion to transform water with the M-Power Aqua Technology, with the pattern of motion bringing about: 1) frequency changes in water; 2) concussive forces to decrease the size of H20 cluster aggregates; and 3) stabilization of smaller H20 cluster aggregates.

The first reason for using a pattern of motion is similar to what takes place with optimizing the immediate environment to fine tune vibrational expression. Slight variances in applying the pattern of motion used in the M-Power Aqua Technology will bring about different frequency expressions, which is supported by mainstream chemistry and physics that establishes a direct relationship between specific geometries and specific frequencies. The second two components associated with the motion component in the M-Power Aqua Technology are focused on reducing and stabilizing the size of H20 cluster aggregates in solution.

Percussive forces are used in homeopathy, which is a system of medicine invented in Germany in the late 1800s, which that is based on like treats like with very diluted solutions of different substances. Solutions are shaken and banged against something solid to imbue and stabilize a substance and its frequency in water and other liquid mediums. Homeopathic percussion must indeed reduce cluster size, at least temporarily, according to the basic principles of mainstream physics and chemistry.

Another example of concussive forces that can reduce H20 cluster aggregate size is high frequency sound, which has medical application in nebulizers to reduce the molecular cluster size of water for the respiratory delivery of medications. High frequency sound produces the finest mist from a solution as compared to any other method, and is capable of reducing H20 down to one molecule at a time.

The M-Power Aqua Technology does not involve the use of homeopathic type percussion or technological application such as high frequency sound. Instead, this technology utilizes a totally unique approach to introducing motion in order to create a range of different effects, including concussive forces to reduce large H20 structure aggregates into smaller ones.

However, it is generally accepted in mainstream chemistry and physics that once a percussive motion or frequency input stops the smaller H20 cluster aggregate size will instantaneously go back to the way it was before as larger aggregates. It is my theoretical perspective that the pattern of motion used in the M-Power Aqua Technology not only reduces H20 aggregate cluster size but also that these clusters will not return to the originally larger aggregates of H20 molecules. A theoretical explanation of what geometric structure changes occur in H20 molecule aggregation and the internal magnetic and energy dynamics with application of the M-Power Aqua Technology is presented very thoroughly in further on in this section as well as other sections of my book and website.

Although still at theory, I maintain that the only explanation for what takes place with the application of the motion component in the M-Power Aqua Technology, must be in part about the reduction and stabilization of smaller H20 cluster aggregates in solution. The pattern of motion itself reveal why this is possible.

The motion component used in the M-Power Aqua Technology is defined as “Platonic Solid Inversion Geometry.” This term is not my invention, but was coined by the late Paul Schatz from Germany who provided a breakthrough understanding about the natural motion of water in streams, underground springs and other fresh water sources in the environment. It is this basic pattern of Platonic Solid Inversion Geometry that is used in a unique and proprietary manner in the M-Power Aqua Technology.

Platonic Solid Inversion Geometry motion of water produces a sequence of pulsating vortexes, which in turn provides the simultaneous actions of concussive forces and frequency enhancement to reduce and stabilize H20 cluster aggregate size. It is the pulsating vortexes, reversing back and forth from clockwise to counterclockwise, that provide concussive forces to water with the application of Platonic Solid Inversion Geometry in Motion.

From a mathematic point of view, Platonic Solid Inversion Geometry is the Perfect Solution to reduce the H20 cluster size in water. In mainstream chemistry and physics the prevailing theory about cluster geometry in water concerns platonic solids: the icosahedron and dodecahedron. It is also pointed out by reliable mainstream sources in chemistry and physics that the icosahedral H20 structure is dominant in low dissolved solid water, forming super clusters that go on and in solution to form millions and billions of individual H20 molecules hooked together. These icosahedral super clusters are also hypothesized to contain trapped dodecahedral clusters. Because there is an inversion of platonic solids with the pattern of motion used on the M-Power Aqua Technology, a shift takes place from one geometry to another.

On a more specific level of platonic solid inversion, the M-Power Aqua Technology will break the chemical bonding of icosahedral H20 clusters and tend not effect the chemical bonding of dodecahedral H20 clusters. Therefore, the dodecahedral H20 clusters are freed in solution. Because of a fundamental difference in magnetic dynamics in solution, dodecahedral H20 clusters will not reform into larger super clusters. Thus, the stabilization of smaller H20 cluster aggregates takes place that have very special properties.

Super Coherency, Super Optimization & Infinite Variance

The M-Power Aqua Technology is proposed as a duplication of how natural forces work in the environment to concuss and vibrate water to bring about a transition to high energy water that promotes a higher degree of cellular hydration. But not all environments are equal. In some environments the forces of nature involving motion and the vibrational expression from the local environment are in greater alignment to produce a more desirable life supporting effect.

In applying M-Power Aqua Technology the process of motion using Platonic Solid Inversion Geometry is super coherent by virtue of eliminating all the randomness normally found in the environment with water flow. Super coherent motion also reduces the time it takes to produce the desired cluster reduction and frequency changes in water.

The vibrational input to water found in the environment may be most difficult to duplicate as “perfect” in order to produce life supporting water that hydrates effectively. The special environment vibration input to water when applying the M-Power Aqua Technology is Super Optimized in order to produce the best effects in terms of vibrational potency and H20 structure stabilization.

A significant difference in applying the motion process in the M-Power Aqua Technology, as compared to all other methods of inducing motion into water for various effects, is that there is the capacity to use infinite variance. This means that the speed, direction and space can constantly change. There is a built in system to gain constant feedback while the process of motion is going on to vary these three parameters of motion in order to perfect the outcome.

H₂0 Structure Enhancement Specifics

Based on the most advanced mainstream physics and chemistry theoretical considerations the smallest cluster of H20 is 20 molecules in size when dealing with low particulate water. This flies in the face of claims from some companies that water can exist in clusters of three, five and seven H20 molecules. When the cluster size is smaller than 20 molecules the structures become two dimensional (flat) and this is simply not possible because the bonds between the H20 would not remain stable. A three dimensional structure is required in order to provide this stability.

The 20 molecule size – as the smallest H20 molecule that does not depend on a dissolved solid – is 20 individual H20 molecules linked together to form the three dimensional solid structure called a dodecahedron, which is spherical in shape. This is one of the five platonic solids name after the very famous philosopher – scientist - mathematician Plato. However, the most common shape of H20 clusters in low particulate water is the icosahedron, which forms literally an infinite array of interconnecting molecules in solution. The very small dodecahedral cluster is usually hidden in most low particulate water because of being trapped within the very large icosahedral cluster. (Click Here to view Platonic Solid drawings that pertain to H20 Structure Enhancement).

By virtue of concussing water with any process of motion the H20 cluster size will become reduced. However, with the mathematics of platonic solid inversion geometry in motion involved as the method to make M-Power products, the best type of cluster reduction from very large to very small clusters will take place. More specifically, the very large icosahedral clusters are separated into smaller components, which free the trapped and very small dodecahedral clusters.

The very large icosahedral clusters of millions upon millions of H20 molecules form because there are electromagnetic attraction forces between each icosahedral cluster at a smaller level. From there a chain reaction takes place whereby the clusters get larger and larger without end. Dodecahedral clusters trapped inside this vast array of icosahedral structure enhancement have repelling electromagnetic forces, which will come into play when they are freed in solution and can interact with each other dynamically. This is a lot like having magnets of North and South attracting each other, while conversely North and North or South and South repel each other.

Once the 20 molecule dodecahedral H20 clusters are free from their icosahedral cages they automatically self stabilize because of their repelling action against each other. This means that a micro structure enhanced water can be maintained as stable as long as there are a sufficient number of dodecahedral clusters to continue repelling each other in that particular volume.


*Low particulate water simply means that water has very low dissolved solids, such as minerals. Usually at a water bottling facility this means that a finished water product for drinking will have no more than one part per million dissolved solids. When there are high amounts of dissolved solids in water this changes the entire equation for describing the types of H20 Structure Enhancement that can exist in water. However, it does not matter if the concentrated M-Water formulas are added to low particulate or high particulate water – this is because the fundamental effect has already been dealt with to provide high energy and structure enhancement.